Freight Charges on this unit is $80.00
Specially designed for job sites and applications where high volume trash water capacity is needed.
The durable Honda GX series commercial grade engine is easy starting and provides ample power for the toughest conditions.
Protects the pump, while offering a convenient tie down location for transport.
The WT20 is designed for quick and easy service. An easy access service port makes clean-out quick.
The volute is equipped with a replaceable stainless steel wear plate, which increases durability and reduces maintenance costs
A convenient multi-tool is provided for easy removal and installation of the pump case, for tightening and removal of the priming plug and drain plug, and for tightening and removal of the hose coupling.
The WB20 features abrasion-resistant silicone-carbide seals for extended wear.
The rigid-mount cast iron volute reduces case wear, increasing the life of the pump.
High performance mounts minimize vibration, keeping the pump from “walking" away or “burying" itself in soft soil conditions. The reduced vibration also reduces wear on components, increasing the pump's durability.
The unique shape improves priming and higher discharge capacity. Wide vanes are designed to resist wear and maximize durability.
Protects the pump by shutting the engine off when low oil is detected.
The strainer allows up to 13/16 in. solids to pass through, as well as a large volume of water, helping to prevent clogging. Made of steel to withstand tough conditions.
Engine | GX160 |
Displacement | 163 cc |
Bore and stroke | 2.7" x 1.8" |
Compression Ratio | 9.0:1 |
Oil Alert | Std |
Pump Type | Trash Centrifugal Self-priming |
Volute | Rigid Mounted Cast Iron w/ Stainless Wear Plate |
Impeller | Conical Cast Iron |
Mechanical Seal (Pump case / impeller) | Silicon Carbide/Silicon Carbide |
Priming time | 60 sec. @ 16.4 ft. |
Drive system | Direct |
Discharge capacity | 185 gal/min |
Suction port diameter | 2" |
Discharge port diameter | 2" |
Total head lift | 85 ft. |
Suction head lift | 26 ft. |
Maximum pressure | 37 psi |
Solids handling | 13/16 inches |
Dimensions (LxWxH) | 24.4" x 18.1" x 18.3" |
Dry weight | 104 lbs. |
Fuel Capacity | 0.82 gal |
Run Time @ Max Discharge | 1.5 hr |
Strainer Part # | 78325-YG0-003 |
Residential Warranty | 24 months |
Commercial Warranty | 12 months |